Hotline
Our Product

bismuth metal carboxylate catalyst/catalyst DABCO MB20

bismuth metal carboxylate catalyst/catalyst DABCO MB20

Overview:

Product name: Organic bismuth catalyst DABCO MB20

Alias: DABCO MB20, Bismuth Metal Carboxylate Catalyst, Organic Bismuth Catalyst DABCO MB20, Catalyst DABCO MB20, Metal Catalyst DABCO MB20

Product Description: Organic Bismuth Catalyst DABCO MB20 for Polyurethane Flexible Foam, Rigid Foam and CASE applications.

The DABCO MB20 catalyst is a carboxylate based on organobismuth. As a co-catalyst, DABCO MB20 catalyst can be used in conjunction with polyurethane tertiary amine catalysts to accelerate urethane (polyol-isocyanate) reactions and curing.DABCO MB20 catalyst is an alternative to organotin catalysts for flexible slabstock sponges, high-density flexible foams, sprayed rigid foams, microcellular elastomers and rigid foam systems.

Product Physical Properties:

Light yellow transparent oily liquid;

Viscosity (25℃): 50mPa.s;

Density (25℃): 1.22g/cm3;

Flash point (PMCC): 158°C;

DABCO MB20 Bismuth Metal Carboxylate Catalyst Organic Bismuth Catalyst DABCO MB20 Catalyst DABCO MB20 Light Foam Catalyst DABCO MB20 Metal Catalyst DABCO MB20

Product Usage:

Dabco MB20 is a bismuth metal carboxylate catalyst that can be used as a co-catalyst for tertiary amines to accelerate the reaction and cure of carbamates;

Dabco MB20 can be used as a replacement for tin metal catalysts in flexible block foams, high density flexible foams, spray foams, microcellular foams and rigid foam systems.

Table of Typical Physical Properties.

Appearance Yellow transparent liquid

Specific gravity 1.22

Viscosity @25°C mPa.s 7997

Water solubility @25°C Insoluble

Flash Point, °C 158

Characteristic

Organic bismuth catalyst for strong gel polyurethanes

Exhibits delayed viscosity on the front end at low dosages while promoting excellent back end curing

Free of mercury, lead and dibutyltin

Low volatility and odor

Compatible with common rigid and flexible foam polyols

Recommendations for use.

DABCO MB20 catalyst can be used in the manufacture of rigid foams, microcellular elastomers and high density flexible polyurethane foams as an alternative to traditional metal catalysts based on Dibutyltin, lead or mercury.DABCO MB20 catalyst improves on the problem of long cure times associated with amine-only catalysts, and in synergistic combinations with other polyurethane amine catalysts, additional activity is gained, resulting in fast curing with excellent foam performance, and does not contain dibutyltin.

Other industries where DABCO MB20 catalyst can be used include high-density structural rigid foams, rigid sprayed rigid foams, rigid foam sandwich panels, sandwich boards, reaction injection molding (RIM) and integral skin foams.

Shelf Life.

Keep unopened for two years

Storage and Transportation:

Should be kept sealed and stored in a dry, cool and ventilated warehouse

Packaging:

200KG/drum Storage: it is recommended to store in dry and cool area with proper ventilation. Please fasten the packaging cover as soon as possible after the original packaging to prevent the mixing of other substances such as moisture and other substances that may affect the product performance. Store in a cool and dry place, keep the container sealed and avoid contact with oxides. Do not inhale dust and avoid contact with skin and mucous membranes. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash before use. Maintain good hygiene practices. The company recommends that all polyurethane catalysts be stored in a dry, cool and properly ventilated area. All storage containers must be well sealed to avoid contact with water or other affected substances, which may alter the performance of the product in use. The storage temperature is 10°C to 30°C. Lower or higher temperatures are inappropriate and should be avoided if possible.

Company Name:

Newtop Chemical Materials (Shanghai) Co., Ltd.

Sales Manager:

Hunter

E_Mail:

 sales@ohans.com

Telephone:

86-152 2121 6908

Fax:

86-021-5657 7830

Address:

Rm. 1104, No. 258, Songxing West Road,
Baoshan District, Shanghai, China (Mainland)

Website:

www.newtopchem.com 

Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.

Prev:
Next: