Our Product



Chinese name: dimethylaminoethoxyethanol, N,N-dimethylethylaminoglycol

Alias: dimethylaminoethoxyethanol, 1704-62-7, N-dimethylethylaminoglycol, low odor foaming catalyst DMAEE, low foaming catalyst DMAEE, low odor catalyst DMAEE, DMAEE, Dabco DMAEE, Toyocat RX3, Jeffcat ZR-70, Lupragen N107, PC CAT NP70, blowing catalyst DMAEE, polyurethane blowing catalyst DMAEE, odorless catalyst, odorless amine catalyst, special catalyst

English name: dimethyaminoethoxyethanol, dimethyl2-(2-aminoethoxy)ethanol, 2-(2-dimethylaminoethoxy)-ethynol

Molecular formula: C6H15NO2

Relative molecular weight: 133.2

CAS Number: 1704-62-7

English name 2-[2-(Dimethylamino)ethoxy]ethanol

Product name 2-[2-(dimethylamino)ethoxy]ethanol; N,N-dimethylaminoethyl glycol

Molecular structure

Molecular formula C6H15NO2

Molecular weight 133.19

CAS 1704-62-7

EINECS 216-940-1

Density 0.954

Boiling point 95 ºC (15 mmHg)

Refractive index 1.442

Flash point 93 ºC

High Quality Dimethylaminoethoxyethanol / CAS 1704-62-7 / DMAEE / 2-[2-(Dimethylamino) Ethoxy] Ethanol

High Quality Dimethylaminoethoxyethanol / CAS 1704-62-7 / DMAEE / 2-[2-(Dimethylamino) Ethoxy] Ethanol

Physical and chemical properties:

Dimethylaminoethoxyethanol is a colorless or light yellow liquid at room temperature, soluble in water;

Viscosity (25℃, mPa.s): 4

Density (25℃, g/cm3): 0.84

Water solubility: soluble in water

Flash point (PMCC, ℃): 88

Hydroxyl value (mgKOH/g): 298


Physical and chemical properties:

Colorless or light yellow liquid, relative density (20℃) 0.96, viscosity 5mPa.s, flash point 86℃ (PMCC), 93℃ (PTT), vapor pressure (21℃)<6.7Pa, boiling point 201~205℃, Freezing point <-40 ℃, soluble in water, pH value is about 11.0.


Features and uses:

It is a low-odor reactive catalyst for rigid foams, and can also be used for molding soft foams and polyether polyurethane soft block foams.



Dimethylaminoethoxyethanol is a non-emission amine catalyst, mainly used in low-density, water-foaming open-cell spray polyurethane foam (SPF); dimethylaminoethoxyethanol can be used as the main catalyst alone, also It can be used as a cocatalyst to reduce the amount of BDMAEE-based foaming catalysts.


Storage and transportation:

Should be sealed and stored in a dry, cool and ventilated warehouse



200KG/drum Storage: It is recommended to store in a dry and cool area with proper ventilation. After the original packaging, please fasten the packaging cover as soon as possible to prevent the water and other substances from mixing into the product and affecting its performance. Do not breathe dust, avoid skin and mucous membrane contact. Smoking, eating and drinking are prohibited in the workplace. After work, shower and change clothes. Store contaminated clothing separately and wash it before reuse. Maintain good hygiene habits.

Company Name: Shanghai OHANS Chemical Co., Ltd.
Sales Manager: Hunter
Telephone: +86-021-5161 9971

+86-021-5161 9972

+86-021-5161 9973

Address: 709 Lingshi Road, Zhabei District, shanghai, China

DMAEE CAS:1704-62-7 2-[2-(Dimethylamino)ethoxy]ethanol


Common Name: 2-[2-(Dimethylamino)ethoxy]ethanol

Other Chimical Names: 2-[2-(dimethylamino)ethoxy]-ethano;Ethanol, 2-2-(dimethylamino)ethoxy-;N,N-Dimethyl-2-(2-aminoethoxy)ethanol;Dimethylaminoethoxyethanol;N,N-Dimethyldiglycolamine;Texacat ZR-70

MF: C6H15NO2


CAS: 1704-62-7

Physical and chemical properties:

Form: liquid  
Odour: mild, amine-like  
Colour: colourless to yellow  
pH value: 11.5 ( 1.. g/l)
Melting point: No data available  
Boiling point: 235 °C ( 1.13 hPa)
Vapour pressure: < 1 mbar ( 25 °C)  
Density: 0.9549 g/cm3 ( 20°C)
Relative density: 0.9549 ( 20 °C)
Partitioning coefficient n -1.21 (calculated)
octanol/water (log Pow):    
Viscosity, dynamic: 1. mPa.s ( 25 °C)  
Solubility in water:    
Molar mass: 133.19 g/mol    



Features and uses:

PC-37 is colorless or light yellow liquid at room temperature, soluble in water;

PC-37 is a low odor reactive catalyst for rigid packaging foam. Its structure contains active hydrogen, which can react with -NCO and combine into the system, so the smell of finished products is greatly reduced. NT CAT PC-37 can also be used for molding soft foam and polyether polyurethane soft block foam.


Storage Information:

Store in a cool and ventilated warehouse. Keep away from fire and heat. Protect from direct sunlight. Keep container sealed. It should be stored separately from oxidant and edible chemicals, and mixed storage is forbidden. Firefighting equipment of corresponding variety and quantity shall be provided.   



190KG/Steel Drum


(PC37, PC-37, POLYCAT 37/Jeffcat ZR-70/DABCO DMAEE/Lupragen N107/ Toyocat RX3/equal)Our Company

Since its establishment, the company has adhered to the service tenet of “integrity-based, customer first”, adhered to customer demand as the focus, market-oriented, adhered to technological innovation, management innovation and service innovation, and constantly implemented lean production, refined management, to provide customers with better products and services! The company has its own factory, research and development base, set up a strict scientific quality management system, and constantly committed to technological innovation, product innovation and management innovation, so as to ensure that our products have a certain competitiveness in the same industry. The factory is located in Jining City, Shandong Province, China, covering an area of 500 acres, and the current production capacity of various types of amines is 5,000 to 10,000 tons per year.

Our Advantages

Strict Quality Management
Our company strictly implements ISO9002 quality management standards and has established a complete quality management system to ensure the long-term stability of product quality.

Efficient Service
Our production is efficient and reliable, so we deliver on time and within delivery deadlines. At the same time, our team is always happy to help customers and strive to solve customer problems in a short time.

Competitive Price
We have long-term services in wholesale Polyurethane catalyst and have established long-term and stable cooperative relationships with many retailers and agents to provide our customers with reasonably priced products.

OEM Available
Our employee team has high R&D capabilities, superb design and development capabilities, skilled manufacturing technology, and rich product application experience, and can also meet OEM business needs.throughout the entire industry chain.