Hotline
Brand Product

SKYBON ES-410 saturated polyester resin

<p style="margin-left:0.0000pt; margin-right:0.0000pt"

Specifications

Parameters

Unit

Value

Appearance

Transparent particles

Molecular weight

16000

Viscosity

dl/g

0.50

Glass transition temperature

47

Softening point

120

Acid value

KOH mg/g

Less than 3

Hydroxyl value

KOH mg/g

4~8

Tensile strength

kg/cm3

470

Application
White cotin in iron printing
Coil steel primer
Adhesive

Features
Suitable for deep drawing
Has good adhesion to iron, aluminum and tinplate
Flexibility and leveling

Dissolve
1. Add all solvents to the reactor.
2. While stirring, put the ES-410 solid into the reactor.
3. After putting in all the components, raise the temperature of the reactor to 90~100 degrees and stir for 2 hours. The maximum pressure in the reactor is: 2kg/cm2
4. Turn off the heating device, stir the mixture continuously for one and a half hours, and let the reactor cool down naturally.
5. Stop stirring, when the solution is filtered, put it into a 200kg bucket

Solvents used
MEK, toluene, acetone, SOVESSO, cyclohexanone, cellulose acetate, isophorone, DBE

Packaging
25kg/bag, 14MT/FCL

background-color:#ffffff”>2. While stirring, put the ES-410 solid into the reactor.
3. After putting in all the components, raise the temperature of the reactor to 90~100 degrees and stir for 2 hours. The maximum pressure in the reactor is: 2kg/cm2
4. Turn off the heating device, stir the mixture continuously for one and a half hours, and let the reactor cool down naturally.
5. Stop stirring, when the solution is filtered, put it into a 200kg bucket

Solvents used
MEK, toluene, acetone, SOVESSO, cyclohexanone, cellulose acetate, isophorone, DBE

Packaging
25kg/bag, 14MT/FCL

Prev:
Next: